# SWAT+ Installation & Help ## 1.2 - [About SWAT+](https://swatplus.gitbook.io/docs/1.2.3/master.md) - [Installation](https://swatplus.gitbook.io/docs/1.2.3/installation.md) - [Getting Started](https://swatplus.gitbook.io/docs/1.2.3/getting-started.md): Download a sample project and watch the guide video to get started with QSWAT+ and SWAT+ Editor - [Get Help](https://swatplus.gitbook.io/docs/1.2.3/get-help.md): Documentation is available in the next section of this website, however please make use of our user groups if you get stuck or run into an issue. - [Troubleshooting](https://swatplus.gitbook.io/docs/1.2.3/get-help/troubleshooting.md): Before contacting support, please ensure you have the newest version of the tools installed. Check the common situations below, and if your error is not covered, consult the appropriate user group. - [Release Notes](https://swatplus.gitbook.io/docs/1.2.3/release-notes.md): SWAT+ Editor 1.2.3 with QSWAT+ 1.2.2 and SWAT+ revision 59.3 - [Source Code](https://swatplus.gitbook.io/docs/1.2.3/source-code.md) - [Download Docs](https://swatplus.gitbook.io/docs/1.2.3/download-docs.md) - [SWAT+ Editor Documentation](https://swatplus.gitbook.io/docs/1.2.3/user/editor.md) - [Project Setup](https://swatplus.gitbook.io/docs/1.2.3/user/editor/project-setup.md) - [Edit SWAT+ Inputs](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs.md) - [Climate](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/climate.md): Weather generator data and weather stations are required for SWAT+ to run. - [Simulation](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/simulation.md) - [Basin](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/basin.md) - [Connections](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections.md) - [Channels](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections/channels.md) - [HRUs](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections/hrus.md) - [Routing Units](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections/routing-units.md) - [Aquifers](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections/aquifers.md) - [Reservoirs](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections/reservoirs.md) - [Recall (Point Source/Inlet)](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections/recall.md) - [Export Coefficients](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections/export-coefficients.md) - [Delivery Ratio](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/connections/delivery-ratio.md) - [Regions](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/regions.md) - [Land Use Management](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/land-use-management.md) - [Decision Tables](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/decision-tables.md) - [Change/Calibration](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/change-calibration.md) - [Initialization Data](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/initialization-data.md) - [Hydrology](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/hydrology.md) - [Soils](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/soils.md) - [Databases](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/databases.md) - [Structural](https://swatplus.gitbook.io/docs/1.2.3/user/editor/inputs/structural.md) - [Write Input Files](https://swatplus.gitbook.io/docs/1.2.3/user/editor/write-input-files.md) - [Run SWAT+](https://swatplus.gitbook.io/docs/1.2.3/user/editor/run-swat+.md) - [Analyze Output](https://swatplus.gitbook.io/docs/1.2.3/user/editor/analyze-output.md) - [QSWAT+ Manual](https://swatplus.gitbook.io/docs/1.2.3/user/qswat+.md) - [SWAT+ IO Documentation](https://swatplus.gitbook.io/docs/1.2.3/user/io.md) - [How to Use SQLite](https://swatplus.gitbook.io/docs/1.2.3/user/how-to-use-sqlite.md) - [SWAT+ Editor Design](https://swatplus.gitbook.io/docs/1.2.3/developer/swat+-editor-design.md) ## 2.3 - [About SWAT+](https://swatplus.gitbook.io/docs/2.3/master.md) - [Installation](https://swatplus.gitbook.io/docs/2.3/installation.md) - [Getting Started](https://swatplus.gitbook.io/docs/2.3/getting-started.md): Download a sample project and watch the guide video to get started with QSWAT+ and SWAT+ Editor - [Get Help](https://swatplus.gitbook.io/docs/2.3/get-help.md): Documentation is available in the next section of this website, however please make use of our user groups if you get stuck or run into an issue. - [Troubleshooting](https://swatplus.gitbook.io/docs/2.3/get-help/troubleshooting.md): Some common issues installing and loading our tools are listed below, organized by software component. Please check through these common scenarios before contacting support. - [Linux and MacOS](https://swatplus.gitbook.io/docs/2.3/get-help/linux-and-macos.md): The Linux release was tested on Ubuntu 22.04 LTS, and MacOS was tested on Ventura. Please let us know if you test on a different OS version or Linux distribution and have any issues. - [Release Notes](https://swatplus.gitbook.io/docs/2.3/release-notes.md) - [Source Code](https://swatplus.gitbook.io/docs/2.3/source-code.md) - [SWAT+ Editor Documentation](https://swatplus.gitbook.io/docs/2.3/user/editor.md) - [Project Setup](https://swatplus.gitbook.io/docs/2.3/user/editor/project-setup.md) - [Edit SWAT+ Inputs](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs.md) - [Climate](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/climate.md): Weather generator data and weather stations are required for SWAT+ to run. - [Connections](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections.md) - [Channels](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections/channels.md) - [HRUs](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections/hrus.md) - [Routing Units](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections/routing-units.md) - [Aquifers](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections/aquifers.md) - [Reservoirs](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections/reservoirs.md) - [Recall (Point Source/Inlet)](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections/recall.md) - [Export Coefficients](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections/export-coefficients.md) - [Delivery Ratio](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/connections/delivery-ratio.md) - [Basin](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/basin.md) - [Regions](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/regions.md) - [Land Use Management](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/land-use-management.md) - [Decision Tables](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/decision-tables.md) - [Change/Calibration](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/change-calibration.md) - [Initialization Data](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/initialization-data.md) - [Hydrology](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/hydrology.md) - [Soils](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/soils.md) - [Databases](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/databases.md) - [Structural](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/structural.md) - [Water\_Rights](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/water_rights.md) - [Sample Data](https://swatplus.gitbook.io/docs/2.3/user/editor/inputs/sample-data.md): Download example data formatted for importing into the editor - [Run SWAT+](https://swatplus.gitbook.io/docs/2.3/user/editor/run-swat+.md) - [QSWAT+ Manual](https://swatplus.gitbook.io/docs/2.3/user/qswat+.md) - [How to Use SQLite](https://swatplus.gitbook.io/docs/2.3/user/how-to-use-sqlite.md) - [SWAT+ Editor Design](https://swatplus.gitbook.io/docs/2.3/developer/swat+-editor-design.md) ## 3.x - [About SWAT+](https://swatplus.gitbook.io/docs/3.0/master.md) - [Installation](https://swatplus.gitbook.io/docs/3.0/installation.md) - [Linux/Mac](https://swatplus.gitbook.io/docs/3.0/installation/linux-mac.md) - [Getting Started](https://swatplus.gitbook.io/docs/3.0/getting-started.md): Download a sample project and watch the guide video to get started with QSWAT+ and SWAT+ Editor - [Get Help](https://swatplus.gitbook.io/docs/3.0/get-help.md): Documentation is available in the next section of this website, however please make use of our user groups if you get stuck or run into an issue. - [Troubleshooting](https://swatplus.gitbook.io/docs/3.0/get-help/troubleshooting.md): Some common issues installing and loading our tools are listed below, organized by software component. Please check through these common scenarios before contacting support. - [Linux and MacOS](https://swatplus.gitbook.io/docs/3.0/get-help/linux-and-macos.md): The Linux release was tested on Ubuntu 24.04 LTS, and MacOS was tested on Sonoma. Please let us know if you test on a different OS version or Linux distribution and have any issues. - [Diagnose and Report Software Errors](https://swatplus.gitbook.io/docs/3.0/get-help/diagnose-and-report-software-errors.md) - [Release Notes](https://swatplus.gitbook.io/docs/3.0/release-notes.md) - [Source Code](https://swatplus.gitbook.io/docs/3.0/source-code.md) - [SWAT+ Editor Documentation](https://swatplus.gitbook.io/docs/3.0/user/editor.md) - [Project Setup](https://swatplus.gitbook.io/docs/3.0/user/editor/project-setup.md) - [Edit SWAT+ Inputs](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs.md) - [Climate](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/climate.md): Weather generator data and weather stations are required for SWAT+ to run. - [Connections](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections.md) - [Channels](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections/channels.md) - [HRUs](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections/hrus.md) - [Routing Units](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections/routing-units.md) - [Aquifers](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections/aquifers.md) - [Reservoirs](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections/reservoirs.md) - [Recall (Point Source/Inlet)](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections/recall.md) - [Export Coefficients](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections/export-coefficients.md) - [Delivery Ratio](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/connections/delivery-ratio.md) - [Basin](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/basin.md) - [Regions](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/regions.md) - [Land Use Management](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/land-use-management.md) - [Decision Tables](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/decision-tables.md) - [Change/Calibration](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/change-calibration.md) - [Initialization Data](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/initialization-data.md) - [Hydrology](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/hydrology.md) - [Soils](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/soils.md) - [Databases](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/databases.md) - [Structural](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/structural.md) - [Water\_Rights](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/water_rights.md) - [Sample Data](https://swatplus.gitbook.io/docs/3.0/user/editor/inputs/sample-data.md): Download example data formatted for importing into the editor - [Run SWAT+](https://swatplus.gitbook.io/docs/3.0/user/editor/run-swat+.md) - [QSWAT+ Manual](https://swatplus.gitbook.io/docs/3.0/user/qswat+.md) - [How to Use SQLite](https://swatplus.gitbook.io/docs/3.0/user/how-to-use-sqlite.md) - [SWAT+ Editor Design](https://swatplus.gitbook.io/docs/3.0/developer-docs/swat+-editor-design.md) ## 4.x - [About SWAT+](https://swatplus.gitbook.io/docs/master.md) - [Installation](https://swatplus.gitbook.io/docs/installation.md) - [Getting Started](https://swatplus.gitbook.io/docs/getting-started.md): Download a sample project and watch the guide video to get started with QSWAT+ and SWAT+ Editor - [Get Help](https://swatplus.gitbook.io/docs/get-help.md): Documentation is available in the next section of this website, however please make use of our user groups if you get stuck or run into an issue. - [Troubleshooting](https://swatplus.gitbook.io/docs/get-help/troubleshooting.md): Some common issues installing and loading our tools are listed below, organized by software component. Please check through these common scenarios before contacting support. - [Linux and MacOS](https://swatplus.gitbook.io/docs/get-help/linux-and-macos.md) - [Diagnose and Report Software Errors](https://swatplus.gitbook.io/docs/get-help/diagnose-and-report-software-errors.md) - [Release Notes](https://swatplus.gitbook.io/docs/release-notes.md) - [Source Code](https://swatplus.gitbook.io/docs/source-code.md) - [SWAT+ Editor Documentation](https://swatplus.gitbook.io/docs/user/editor.md) - [Project Setup](https://swatplus.gitbook.io/docs/user/editor/project-setup.md) - [Edit SWAT+ Inputs](https://swatplus.gitbook.io/docs/user/editor/inputs.md) - [Climate](https://swatplus.gitbook.io/docs/user/editor/inputs/climate.md): Weather generator data and weather stations are required for SWAT+ to run. - [Connections](https://swatplus.gitbook.io/docs/user/editor/inputs/connections.md) - [Channels](https://swatplus.gitbook.io/docs/user/editor/inputs/connections/channels.md) - [HRUs](https://swatplus.gitbook.io/docs/user/editor/inputs/connections/hrus.md) - [Routing Units](https://swatplus.gitbook.io/docs/user/editor/inputs/connections/routing-units.md) - [Aquifers](https://swatplus.gitbook.io/docs/user/editor/inputs/connections/aquifers.md) - [Reservoirs](https://swatplus.gitbook.io/docs/user/editor/inputs/connections/reservoirs.md) - [Recall (Point Source/Inlet)](https://swatplus.gitbook.io/docs/user/editor/inputs/connections/recall.md) - [Export Coefficients](https://swatplus.gitbook.io/docs/user/editor/inputs/connections/export-coefficients.md) - [Delivery Ratio](https://swatplus.gitbook.io/docs/user/editor/inputs/connections/delivery-ratio.md) - [Basin](https://swatplus.gitbook.io/docs/user/editor/inputs/basin.md) - [Regions](https://swatplus.gitbook.io/docs/user/editor/inputs/regions.md) - [Land Use Management](https://swatplus.gitbook.io/docs/user/editor/inputs/land-use-management.md) - [Decision Tables](https://swatplus.gitbook.io/docs/user/editor/inputs/decision-tables.md) - [Change/Calibration](https://swatplus.gitbook.io/docs/user/editor/inputs/change-calibration.md) - [Initialization Data](https://swatplus.gitbook.io/docs/user/editor/inputs/initialization-data.md) - [Hydrology](https://swatplus.gitbook.io/docs/user/editor/inputs/hydrology.md) - [Soils](https://swatplus.gitbook.io/docs/user/editor/inputs/soils.md) - [Databases](https://swatplus.gitbook.io/docs/user/editor/inputs/databases.md) - [Structural](https://swatplus.gitbook.io/docs/user/editor/inputs/structural.md) - [Water\_Rights](https://swatplus.gitbook.io/docs/user/editor/inputs/water_rights.md) - [Sample Data](https://swatplus.gitbook.io/docs/user/editor/inputs/sample-data.md): Download example data formatted for importing into the editor - [Run SWAT+](https://swatplus.gitbook.io/docs/user/editor/run-swat+.md) - [QSWAT+ Manual](https://swatplus.gitbook.io/docs/user/qswat+.md) - [How to Use SQLite](https://swatplus.gitbook.io/docs/user/how-to-use-sqlite.md) - [SWAT+ Editor Design](https://swatplus.gitbook.io/docs/developer-docs/swat+-editor-design.md) --- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on a page URL with the `ask` query parameter: ``` GET https://swatplus.gitbook.io/docs/master.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.